Description
Premium Getinge HS-2400 / HS-4800 / HS-9600 / HS-15000 reverse osmosis filter (61301605464). Made in the USA in ISO 9001:2008 Certified Facilities. Replace your old Getinge RO Membrane with this Superior Premium Replacement.
Membranes required for Getinge / Watts HS-Series water systems:
- HS-2400 requires one (1)
- HS-4800 requires two (2)
- HS-9600 requires four (4)
- HS-15000 requires six (6)
Install this membrane with the brine seal oriented opposite the direction of the water flow arrow on the membrane housing. Call us if your have any questions.
Specifications
Recommended Operation Conditions:
Maximum Applied Pressure: 300 psi (2.1 MPa)
Maximum Feed Flow Rate – 4″ elements: 17 gpm
Maximum Operating Temperature: 113° F (45° C)
Maximum Feed Water Turbidity: 1 NTU
Maximum Feed Water SDI (15min): 4
Chlorine Tolerance: 0
Feedwater pH Range, continuous operation: 2-11
Feedwater pH Range, short-term cleaning (30 min): 1-12
Minimum brine flow to permeate flow ratio: 5:1
*Note: Performance specifications based on 2,000 mg/l sodium chloride, 225 psi (1.6 MPa) applied pressure, 77°F (25°C) feed water temperature, pH 8 and 10% recovery. Element permeate flow may vary ± 15%.
